XPENG G3 - Cargo Cover

2.Preparation（Exterior Overview）
33
1
2
3
4
5
6
7
8
9
10
11
Cargo Cover
1. Pull out the cargo cover.
2. Snap the two ends of the cargo cover into
the fixing grooves on both sides of the
trunk.
Warning
●
After the cargo cover is unfolded, it
is forbidden to place any objects on
the cover. Otherwise, the cover will be
damaged or the object will be thrown
forward in case of collision accident,
causing injury to passengers.
Disassembly of Cargo CoverDisassembly of Cargo Cover
Fold back seatback Refer to page 88.
─
Squeeze either end of the cover to remove
it.
─
When installing, snap one end of the cargo
cover into the fixing groove first, squeeze
the other end of the cover, and snap it into
the xing groove.