XPENG G3 - Electronic Stability Program (ESP)

4.Travel With Safety
119
1
2
3
4
5
6
7
8
9
10
11
Electronic Stability Program (ESP)
ESP can identify the driving state of the
vehicle (such as understeer, oversteer or drive
wheel slip) by sensors, which can specifically
brake intervention or limit the driving torque,
effectively reduce the risk of sideslip or tail
flick, to ensure the driving stability of the
vehicle.
Turn On or O on the Central Control Turn On or O on the Central Control
ScreenScreen
─
Turn it on /o through" → XPILOT →
Electronic Stability Program" switch on the
central control screen.
Tips
●
When the vehicle is powered on, the ESP
function is automatically turned on by
default.
●
ESP will limit the power output when
the vehicle skids (starting or rapid
acceleration on a snowy road, muddy
road), so when the vehicle is stuck in
muddy, etc., you need to temporarily
shut down the ESP system, and then turn
it back on after getting out of trouble.
Warning
●
ESP can not prevent accidents caused
by dangerous driving or high-speed
emergency steering.
●
If ESP fails, please contact the local
authorized service center immediately
for overhaul.