XPENG G3 - Jumper Starting

10.Emergency Rescue
257
1
2
3
4
5
6
7
8
9
10
11
Jumper Starting
If the energy level of the 12V battery is too low
to activate the vehicle, it is allowed to activate
it by jumper starting.
Cable ConnectionCable Connection
─
Connect one end of the red cable to the
positive pole (+) of the vehicle's 12V
battery, and the other to the positive of the
auxiliary power supply.
─
Connect one end of the black cable to
the negative pole (-) of the vehicle's 12V
battery, and the other to the negative of
the auxiliary power supply.
─
Activate the vehicle. When the vehicle
is activated successfully, disconnect the
connected cables in the reverse order.