8.Maintenance
206
Charging Dock Cleaning
In normal use situation, do the cleaning with a
high-pressure air gun and brush every week. If
not possible to perform it, it is allowed to clean
the charging stock and charging gun with a
piece of dust-free cloth or cotton swab. In case
of unexpected conditions (such as charging
port cover not fastened), the above methods
should be performed for cleaning in a timely
manner.
Warning
●
It is strictly prohibited to use sharp
objects such as screwdrivers and
tweezers to touch the charging gun pins
and the charging socket apertures to
avoid damage to the pins and apertures.
Tire Maintenance
Tire Inspection and MaintenanceTire Inspection and Maintenance
Check regularly that the tread and sidewall is
free of any trace of deformation (bulging), cut
or wear.
Tire WearTire Wear
Adequate tread depth is critical to tire
performance. A tire with tread depth less than
3 mm is more prone to skidding on wet roads
and should not be used, while those with a
tread depth of less than 4 mm show poor
performance when running on snowy and
muddy roads and should not be used in winter.
In order to reduce tire wear and extend tire
service life, you can maintain your tires based
on your driving habits and the road conditions:
─
Avoid quick driving-o and violent
acceleration.
─
Avoid sharp turns and heavy braking.
To Next Page
Loading...
Need help?
General
