4.Travel With Safety
123
1
2
3
4
5
6
7
8
9
10
11
Hill Descent Control (HDC)
HDC is a cruising function, which can help
the driver to go downhill at a constant speed,
and relieve the fatigue of the foot that has
been stepping on the brake pedal when going
downhill.
Turn On or O on the Central Control Turn On or O on the Central Control
ScreenScreen
─
Turn it on/o through" → XPILOT → Hill
Ddscent Control" on the central control
screen.
─
HDC working velocity: 8 ＜ V ＜ 38km/h.
During HDC working, if step on the brake
or throttle, the function will exit to let the
driver take over the vehicle; when the
speed exceeds 64km/h, the function will
completely exit and prohibit entry.
Tips
●
HDC can work on slopes ≤ 50%.
●
Conditions for activating HDC: vehicle
speed <34km/h; brake disc temperature
is normal; ESP system is normal.
Caution
●
HDC can actively keep the vehicle
falling at a constant speed, but cannot
exceed the laws of kinematics. For
safety reasons, the driver should apply
the brake in time according to the
actual situation of the vehicle to avoid
accidents caused by excessive downhill
speed of the vehicle.
To Next Page
Loading...
Need help?
General
