4.Travel With Safety
109
1
2
3
4
5
6
7
8
9
10
11
If the front passenger is not wearing a seat
belt, the corresponding seat belt indicator light
on the dashboard will flash with intermittent
beeping.
If the rear passenger is not wearing seat belt,
the corresponding seat belt indicator light on
the dashboard will ash (the function is o by
default).
─
It can be turned on by the switch button on
the central control screen " → Vehicle
→ Seats & Belts → Rear Seat Belt Reminder".
If all the occupants in the car have fastened
seat belts and the warning light is still ashing,
please fasten the seat belts again to ensure
that the seat belts are properly locked.
Notes on Seat BeltsNotes on Seat Belts
Caution
●
When the vehicle is driving, all person
in the vehicle must wear the seat belt
correctly, otherwise, in the event of an
accident, it is easy to increase the risk of
casualties.
●
When wearing a seat belt, the seat belt
must fit the body without twisting, and
the shoulder belt portion of the seat belt
must be bypassed from the middle of
the occupant's shoulder. And it must be
tied to the upper body of the passenger
and tightened. The waist part of the
seat belt must be as low as possible,
around the hips, if necessary, pull down
the seat belt body slightly, and pull in
the direction of the seat belt retract to
adjust.
To Next Page
Loading...
Need help?
General
