XPENG G3 - Page 162

5.XPILOT
162
─
The system does not always recognize all
parking spaces, for example: the parking
space marking is blurred, damaged,
chaotic, or covered.
─
Automatic parking systems may incorrectly
identify parking spaces, such as gaps
between ower beds and trees, etc.
─
There are disturbing lines near the parking
spaces, such as traces of old parking
spaces, tire marks, and no-stop marking
lines that have not been completely
removed.
─
The sensor cannot recognize the road
surface with height dierence. Do not use
the automatic parking system on the cliff
side, high platform, street sidewalk and
other places.
─
The recognition capability and range of
the sensor are limited. It cannot recognize
suspended objects, or low objects (such
as ground locks, limit bars, etc.), small
volume, and small width obstacles. When
there are similar objects in the parking
environment, please be sure to observe
and prepare to take over the vehicle at any
time to avoid collision.
─
The system may not recognize or support
parking spaces in behind the wall or
corners.
─
There are hollow objects near the parking
space or in the parking space (such as
bicycle wheels, drains, etc.).
─
Near the parking space, there are
cylindrical, square or other shaped pillars.
─
If snow chains or spare wheels are
installed, do not use the automatic parking
system.
─
If the loaded object protrudes from the
vehicle, do not use the automatic parking
system.
─
If any of the left and right exterior mirrors
or 360
°
view cameras are damaged or
in an abnormal position, do not use the
automatic parking system.