8.Maintenance
222
Cleaning and Maintenance of Cleaning and Maintenance of
External Plastic PartsExternal Plastic Parts
─
In general, they can be cleaned with water,
soft cloth and soft brush.
Cleaning of Windows and Rearview Cleaning of Windows and Rearview
MirrorsMirrors
─
Clean the window glasses and rear-
view mirrors with an alcohol-based glass
cleaner, and then dry the glass surface
with a clean lint-free soft cloth or antelope
skin.
─
After a maintenance to the vehicle surface,
the wax remained on the glasses should
be removed with a special cleaner and
cleaning cloth to avoid scratching the
wiper blades.
─
It is allowed to use a small brush to remove
snow on the windows and rear-view
mirrors.
─
Deicing spray and deicing spatula are
allowed to be used to remove ice, but
it should be operated carefully to avoid
damaging the components and in the
same direction when using such tools.
Caution
●
Never use warm or hot water to remove
ice and snow from the windshield and
rear-view mirrors. Otherwise, it may
cause glass burst.
●
If there's residual rubber, grease or silica
gel on the glass, it must be removed
with a special vehicle window cleaner or
silica gel cleaner.
Maintenance of Sealing StripMaintenance of Sealing Strip
─
Maintenance operations on the sealing
strip is to be performed with a soft cloth to
remove surface dust and dirt. It is required
to use a special protective agent to coat
the rubber sealing strip regularly.
To Next Page
Loading...
Need help?
General
