2.Preparation(Exterior Overview)
30
Tailgate Stop Mode InitializationTailgate Stop Mode Initialization
After the tailgate starts the stop mode, when
the 12V battery voltage returns to normal, if
the tailgate is in the fully closed state, it can be
electrically opened; if the tailgate is in the fully
opened state, it needs to be manually closed
then the electric function can be restored.
Anti-pinch FunctionAnti-pinch Function
Tailgate has anti-pinch function during electric
opening or closing:
●
In the process of the tailgate electric
opening, if the anti-pinch function is
triggered, the tailgate will immediately
stop opening and the buzzer will beep
once.
●
In the process of the tailgate electric
closing, if the anti-pinch function is
triggered, the tailgate will immediately
move in the opposite direction for a
distance and then stop, the buzzer will
beep once.
Anti-pinch InitializationAnti-pinch Initialization
When the anti-pinch function is triggered
consecutively for 5 times in the process of
tailgate opening or closing, the electric
function will be invalid. The electric function
is restored only after the tailgate is manually
closed.
Tailgate Height SettingTailgate Height Setting
When the tailgate is in half-opened or fully
opened and stopped states, press and hold
(about 3 seconds) the button inside the
tailgate until the buzzer sounds for a long time
and then release it. The system memorizes this
height position successfully. When the tailgate
is opened electrically next time, it will open to
the setting height by default.