94 Doc. 20780_03
Planning and Commissioning Manual ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
19 Disassembly and Disposal
Once its service life has expired, the device must be disassembled and disposed of using an
environmentally safe procedure.
19.1 Safety
Personnel
Work on the electrical system must only be carried out by qualified electricians.
19.2 Environmental Protection
Environmental Damage
ACHTUNG!
Environmental threat due to incorrect handling!
Incorrect handling of environmentally hazardous substances, especially in the
event of improper disposal can cause considerable damage to the
environment. Therefore:
Always take into account the information provided in the following.
If environmentally hazardous substances are accidentally released into
the environment, take immediate and appropriate measures. If in doubt,
inform the competent local authority about the damage.
If there is no return or disposal agreement, disassembled components should be recycled
as:
Scrap metals
Plastic items for recycling
Other components sorted by material properties
The local authority or a waste disposal specialist will provide information on envinronmentally
compatible disposal.
19.3 Measures before Disassembly
Before starting disassembly:
1. Turn off the power.
2. Secure the main switch with a padlock against switching on again.
To Next Page
Loading...
Need help?
General
