Xtrails ADPRO PRO-18 User Manual

Doc. 20780_03 73
A
DPRO Passive-Infrared (PIR) PRO Series by Xtralis Planning and Commissioning Manual
The CT PRO2 consists of a transmitter connected to the RS-485 test socket in the detector
and a battery-operated receiver.
12.4 ZA P-L1 – Pole-mount Attachment
Suitable for all models. This allows the detector to be mounted on a pole.
The attachment is suitable for masts with diameter of 40-160 mm.
12.5 AD653 - Pole-Mount for PRO-250H
Especially for PRO-250H. The detector can be mounted on a mast with this special holder.
The attachment is suitable for masts with diameter of 40-160 mm.
12.6 PRO-CMB-W - Cable Managed Bracket
This robust and durable cable managed bracket can be used for all detectors (not PRO-
250H). This optional accessory offers an easy and quick solution for an efficient installation.
 Hidden cabling discouraging cable vandalism
 Standard compliance
 Tamper protection and detection (including sealable locking screw)
 Tamper switch for detection of removal from mounting surface and opening the base
junction box
 Automatic tamper alarm of the detector when housing is opened or tilt (vandalism
alarm)
 Field of view respectively range, sensitivity and area adaptable

Xtrails ADPRO PRO-18 Specifications

General

Brand	Xtrails
Model	ADPRO PRO-18
Category	Security System
Language	English