EasyManuals Logo

Xtrails ADPRO PRO-18 User Manual

Default Icon
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Doc. 20780_03 27
A
DPRO Passive-Infrared (PIR) PRO Series by Xtralis Planning and Commissioning Manual
NOTE!
The nominal detection range varies depending on the detector model.
For the nominal range of the detector models see technical data in
chapter 16.
3. Retighten the screw.
6.1.4.2 Accurate Fine Alignment
The AD 851 fits all detector models and should be used for fine alignment.
6.1.4.3 Finalization of Installation
Retighten the screw carefully.
NOTE!
Be careful that the position of the detector is not panned or tilt during
this process.
6.1.4.4 Ready for Walk Test
The detector is now ready for commissioning.This can be done either using the hardware
mode or software mode as it will be explained in the following sections.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xtrails ADPRO PRO-18 and is the answer not in the manual?

Xtrails ADPRO PRO-18 Specifications

General IconGeneral
BrandXtrails
ModelADPRO PRO-18
CategorySecurity System
LanguageEnglish

Related product manuals