Doc. 20780_03 75
DPRO Passive-Infrared (PIR) PRO Series by Xtralis Planning and Commissioning Manual
May be the mounting surface is not always plane and smooth. This can be adjusted by the
screw (not included in the kit). It is recommended to have a distance of 6 mm between screw
head (upper edge) and the bottom surface of the cable managed bracket. Take care that the
connection cable is not trapped and can move easily to ensure both detections (remove and
opening).
NOTE!
For proper operation a final test is recommend as mandatory.
To Next Page
Loading...
Need help?
General
