Xycom 3510T - Page 69

Chapter Four – Keypad Utility
69
Exit
Returns to the Main Menu.
Note
Only one macro set may reside in memory at one time.
A checksum will be calculated during transmission and an error message displays if
an error occurs.
Download Menu
Note
Any macro set previously programmed is overwritten when you select Download.
Download sends the set of keypad macros to the keyboard controller. The macro set
must reside in memory before it can be downloaded. A checksum is calculated
during transmission and an error message displays if an error occurs.
As the macro is sent, keyboard controller programs its EEPROM with the new
macros which become the new key definitions for the keypad.
Utilities Menu
When Utilities is selected, a menu bar displays four choices: Func Lock ON,
Func Lock OFF, Clear EEPROM, and Exit.
Func Lock ON
Not available on the 3510KP/3512KP.
Func Lock OFF
Not available on the 3510KP/3512KP.
Clear EEPROM
Erases the EEPROM memory. This clears the entire keypad macro set. After using
this feature, the unit should be turned off and then on. This will initialize the
EEPROM with the default settings.