Chapter Five – Keypad Utility for 3535
75
Files Menu
You can save files containing keypad macro sets (a macro for each key) on disk, and
then loaded them into memory to view, edit, teach, or download to the keyboard
controller. Some of these files may be included in the utility package for use in
reconfiguring the keypads for different software packages, and as templates for
defining completely new keypad macro sets.
When you choose File, a pull-down menu will display the following choices:
Open, Close, Save, Save As, Delete, and Exit. The following table describes the
menu commands.
Command Description
Open Opens a file that contains a macro set for the keypad and loads the
contents into memory. Any macro set in memory is overwritten. Once
loaded, the macro set is available to edit, view, teach, or download to the
keyboard controller.
Close Clears the macro set from memory and closes the file from which they
came.
Save Copies the macro set from memory back into its original file. The original
file contents are overwritten.
Save As Creates a new file under the specified name and copies the macro set
from memory into it. For example, to define different sets of codes, save
each set under a different name and download the one you wish to use.
Delete Deletes a file.
Exit Returns to the Main Menu.
NOTE: The 3535KPM uses 3515KP files.
Macros Keypad Type Menu
When you select Macros, a pull down menu displays and provides the following
choices: Function Keys, Alpha Keys, and Exit. Also, another pull down menu
displays the following choices once the Macros menu is chosen: Exit, View, Teach,
and Edit.
Note
You must have a macro file in memory before the Macros Menu is available. To load a
macro file, open a file or upload macros.
Command Description
Function Keys Selects the function keys on the keypad to either view, edit, or teach.
Alpha Keys Selects the alpha keys on the keypad to either view, edit, or teach.
Exit Returns to the main menu.
To Next Page
Loading...
