3 - 28
INSP
ADJ
FUSE INSPECTION (TT-R90E)
3. Replace:
● Blown fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
● Rear fender
● Seat
Replacement steps:
● Set the main switch to “OFF”.
● Install a new fuse of the correct amperage.
● Set on the switches to verify if the electri-
cal circuit is operational.
● If the fuse immediately blows again, check
the electrical circuit.
Items
Amperage
rating
Q’ty
Main fuse 10 A 1
To Next Page
Loading...
Need help?
General
