– +
ELEC
6 - 17
CARBURETOR HEATING SYSTEM
CARBURETOR HEATING SYSTEM
INSPECTION STEPS
Use the following steps for checking the possibility of the malfunctioning carburetor heating system.
OTE:
● Remove the following parts before inspection.
1) Seat
2) Fuel tank
● Use the following special tools in this inspection.
Check entire carburetor
heating system for connec-
tion.
Repair or replace.
Check thermo switch. Replace.
Check carburetor heater. Replace.
Check CDI magneto. Lighting coil Replace.
Replace rectifier/regulator.
Pocket tester:
YU-3112-C/90890-03112
OK
OK
OK
No good
No good
No good
No good
OK
To Next Page
Loading...
Need help?
General
