YASKAWA GA800 Series User Manual

7 Electrical Installation
YASKAWA TOEPC71061737B GA800 Drive Installation & Primary Operation 41
The procedures to wire the main circuit terminal block are different for different drive models. Refer to Table 7.2 for
procedures by drive model.
Table 7.2 Types of Wiring Procedure for the Main Circuit Terminal Block
Model Procedure Reference
2004 - 2211
4002 - 4168
Procedure A 41
2257 - 2415
4208 - 4720
Procedure B 45
■ Wiring the Main Circuit Terminal Block Using Procedure A
Notes on Wiring the Main Circuit Terminal Block
Read these notes before you wire the main circuit terminal block.

YASKAWA GA800 Series Specifications

General

Series	GA800
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Communication	Ethernet/IP, Modbus RTU/TCP, PROFIBUS, PROFINET, DeviceNet
Safety	STO (Safe Torque Off)
Enclosure	IP00, IP20, IP55
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Ground Fault, Short Circuit
Enclosure Rating	IP00, IP20, IP55
Voltage Class	200V, 400V