Figure 7.17 Remove the Terminal Board
Figure 7.18 Removable Terminal Board Disconnected from the Drive
n
Reinstalling the Terminal Board
1.
Reinstall the removable terminal block on the drive according to
Figure 7.19.
Place the terminal board below the
guide tracks in the plastic case of the
drive. Then push it gently down and
slide it toward the keypad until the
locking pin clicks into place.
Figure 7.19 Terminal Board Reinstallation
2.
Ensure the terminal block is firmly fastened to the connector.
7.5 Drive Replacement
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
303
7
Periodic Inspection &
Maintenance
To Next Page
Loading...
