YASKAWA Motoman MH Series - Figure 5-4 Mounting Holes on Faceplate MH450; Figure 5-5 Mounting Holes on Faceplate MH1500

TOOLING RECOMMENDATIONS
MOTOMAN 5-3 MH-Series Positioner Manual with MotoMount
p
Figure 5-4 Mounting Holes on Faceplate MH450
CAUTION!
To properly secure fixture, rated loads require the use of all M16
mounting holes.
Figure 5-5 Mounting Holes on Faceplate MH1500
100 MM
(3.93 IN.)
100 MM
(3.93 IN.)
250 MM
(9.84 IN.)
125 MM
(4.92 IN.)
2 X SLIP FIT
FOR M12
DOWEL
4 X M12 x 1.75
100 MM
(3.93 IN.)
100 MM
(3.93 IN.)
0.0
30 MM OD X 6 ID THRU
PILOT – 1/8-28 BSPT
M16 X 2 THRU
225.0 MM
(8.85 IN)
274.5 MM
(10.80 IN)
30 MM
(1.18 IN)
TYP.
TYP.
12.5 MM
(.49 IN)
4 X M10 1.5 THRU
2 X M12 THRU
225.0 MM
(8.85 IN)
194.9 MM
(7.67 IN)
194.9 MM
(7.67 IN)
112.5 MM
(4.42 IN)
112.5 MM
(4.42 IN)
0.0
225.0 MM
(8.85 IN)
194.9 MM
(7.67 IN)
112.5 MM
(4.42 IN)
225.0 MM
(8.85 IN)
194.9 MM
(7.67 IN)
112.5 MM
(4.42 IN)
5 MM (.20 IN) DEEP
200 MM (7.87 IN.)
284.5 MM
(11.20 IN.)
264.5 MM
(10.41 IN.)
TYP.