7-3
168542-1CD
168542-1CD
MLX200 Software and
Operations
7 Configuration and Maintenance of MLX200 Control Module
7.1 MLX200 Control Module Status Display
Once the application is running, click on “File” menu item and click on
“Connect…” from the drop down menu as shown in Fig.7-3 "Remote
Display Application Connection Process" (left). This will bring up a dialog
showing a list of active target devices as shown in
Fig.7-3 "Remote Display Application Connection Process" (right). The
MLX200 Control Module will appear in the list of devices in a few seconds.
Once it appears, click on the MLX200_Module listing to select it and press
the [OK] button. The display screen of the MLX200 Control Module will
now appear on the User PC in a few seconds, as shown in Fig.7-5 "Status
Display screen of MLX200 Control Module viewed through Remote
Display Application".
Fig. 7-3: Remote Display Application Connection Process
Fig. 7-4: Windows Security Alert Dialog Box
When you click on the “Connect…” drop down menu item in
the remote display application for the first time, Windows
Firewall will ask the user to allow the connection (Fig.7-4
"Windows Security Alert Dialog Box"). Click on the [Allow
access] button to allow the connection. This dialog box will
be shown only once.
To Next Page
Loading...
