7-11
168542-1CD
168542-1CD
MLX200 Software and
Operations
7 Configuration and Maintenance of MLX200 Control Module
7.2 Maintenance and Configuration Operations
Fig. 7-15: Selecting a Download Operation
In order to upload a new configuration file or license file, select the
“Upload/Restore” category on the left and select the respective operation
in the middle as shown in Fig.7-16 "Selecting a Upload Operation".
Fig. 7-16: Selecting a Upload Operation
Select the appropriate operation and then click on the [Execute] button. A
new pop-up dialog will be shown as shown in Fig.7-17 "Selecting a File to
Upload to the MLX200 Control Module" that allows the user the select the
appropriate configuration file or license file to be uploaded. Select the file
that should be uploaded and then click on the [Select] button. The
selected file will be uploaded to the MLX200 Control Module.
All upload operations from the {Maintenance} screen
require a USB Disk that contains the files to be uploaded, to
be inserted into an available USB port on the MLX200
Control Module.
To Next Page
Loading...
