viii
168542-1CD
168542-1CD
MLX200 Software and
Operations
Description of the Operation Procedure
In the explanation of the operation procedure, the expression “Select • • • “
mns that the cursor is moved to the object item and the SELECT key is
pressed, or that the item is directly selected by touching the screen.
Registered Trademark
In this manual, names of companies, corporations, or products are
trademarks, registered trademarks, or brand names for each company or
corporation. The indications of (R) and
TM
are omitted.
Explanation of Warning Labels
The following warning labels are attached to the manipulator.
Fully comply with the precautions on the warning labels.
• The label described below is attached to the manipulator. Observe
the precautions on the warning labels.
• Failure to observe this caution may result in injury or damage to
equipment.
Refer to the manipulator manual for the warning label location.
WARNING
Do not enter
robot
work area.
WARNING
Moving parts
may cause
injury
To Next Page
Loading...
