YASKAWA Varispeed G7 Series User Manual

6 -170
Application Precautions
The DI-08 will not function if F3-01 is set to 6
Selecting the Digital Reference
The range of the digital references is determined by the combination of the settings of o1-03 and F3-01. The
information monitored in U1-01 (Frequency reference) will also change.
DI-16H2 Reference Ranges
When using the DI-16H2, the following ranges can be set depending on the settings of the constants.
Terminal Pin No.
8-bit Binary with Sign 2-digit BCD with Sign
F3-01 = 7 F3-01 = 0 to 5
TC
1
Bit 1 (2
0
)
1
BCD digit 1
(0 to 9)
2
Bit 1 (2
1
)
2
3
Bit 1 (2
2
)
4
4
Bit 1 (2
3
)
8
5
Bit 1 (2
4
)
1
BCD digit 2
(0 to 15)
6
Bit 1 (2
5
)
2
7
Bit 1 (2
6
)
4
8
Bit 1 (2
7
)
8
9 Sign signal
10 SET (read) signal
11 Reference common signal (0 V)
o1-03 F3-01
Switch
S1
Reference Input Mode
Reference Setting
Range
U1-01 Monitor Unit
o1-03 = 0 o1-03 = 1
0 or 1
0
12 bits 3-digit BCD with sign, 1% -110 to 110%
0.01 Hz 0.01%
16 bits 4-digit BCD with sign, 1% -110 to 110%
1
12 bits 3-digit BCD with sign, 0.1% -110.0 to 110.0%
16 bits 4-digit BCD with sign, 0.1% -110.0 to 110.0%
2
12 bits 3-digit BCD with sign, 0.01% -15.99 to 15.99%
16 bits 4-digit BCD with sign, 0.01% -110.0 to 110.0%
3
12 bits 3-digit BCD with sign, 1 Hz -400 to 400 Hz
16 bits 4-digit BCD with sign, 1 Hz -400 to 400 Hz
4
12 bits 3-digit BCD with sign, 0.1 Hz -159.9 to 159.9 Hz
16 bits 4-digit BCD with sign, 0.1 Hz -400.0 to 400.0 Hz
5
12 bits 3-digit BCD with sign, 0.01 Hz -15.99 to 15.99 Hz
16 bits 4-digit BCD with sign, 0.01 Hz -159.99 to 159.99 Hz
6 16 bits 5-digit BCD without sign, 0.01 Hz 000.00 to 399.98 Hz
7
12 bits 12-bit binary with sign, 100%/4095 -4095 to 4095
16 bits 16-bit binary with sign, 100%/30000 -33000 to 33000
TOE-S616-60.1.book 170 ページ ２０１７年８月４日 金曜日 午後３時４１分

YASKAWA Varispeed G7 Series Specifications

General

Brand	YASKAWA
Model	Varispeed G7 Series
Category	Inverter
Language	English