86
* Terminal MA can be used only from DeviceNet communications. There is
no corresponding external output terminal.
Byte 1,
bit 7
Te r min al
P2
Indicates the output status of Inverter
multi-function output terminal P2.
0: Terminal P2 OFF
1: Terminal P2 ON
Bytes
2 and 3
Speed Ac-
tual
Indicates the Inverter’s speed.
The units depend on the setting in Invert-
er constant n035. The units are not af-
fected by the speed scale (SS) setting.
Bytes
4 and 5
Register
Number
Indicates the MEMOBUS register num-
ber in the executed process. These
bytes will contain the MEMOBUS error
code if a read or write error occurred.
Bytes
6 and 7
Register
Data
Indicates the read data when executing
a MEMOBUS READ command.
Data Name Contents
To Next Page
Loading...
