User Guide for the SIP-T26P IP Phone
88
1) Press or to select the No Answer Forward field.
2) Press the All Lines soft key.
The LCD screen prompts “Copy to all lines?”.
3) Press the OK soft key to accept the change or the Cancel soft key to
cancel.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
If you activate call forward for the default account, the associated line icon will
change to , and the icon will appear on the status bar.
Call forward is configurable via web user interface at the path Features->Forward &
DND.
Note
To disable call forward in phone mode:
Do one of the following:
- Press when the phone is idle.
- Press Menu->Features->Call Forward.
Press or to select the desired forwarding type, then press the Enter soft
key.
Press or , or the Switch soft key to select Disabled to disable the call
forward.
Press the Save soft key to accept the change.
To disable call forward in custom mode for a specific account:
1. Press Menu->Features->Call Forward or press when the phone is idle.
2. Press or to select the desired account,and then press the Enter soft key.
3. Press or to select the desired forwarding type, then press the Enter soft
key.
4. Press or , or the Switch soft key to select Disabled to disable the call
You can also enter the SIP URI or IP address in the Forward To field. For more information
on using the SIP URI or IP address, refer to Placing Calls on page 69.
Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,
contact your system administrator.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
