User Guide for the SIP-T26P IP Phone
106
When a call is being parked against the monitored phone, press the BLF List key to
retrieve the parked call from the monitored user. Before retrieving the parked call,
ensure that the BLF List Retrieve call parked Code has been configured in advance.
If the code is not configured, the phone will place a call to the monitored user
instead of retrieving the parked call when you press the BLF List key.
To configure BLF List settings via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the BLF List URI in the BLF List URI field.
4. (Optional.) Enter the directed pickup code in the BLF List code field.
5. (Optional.) Enter the barge-in code in the BLF List Barge In Code field.
6. (Optional.) Enter the call park retrieve code in the BLF List Retrieve call parked
Code field.
7. Click Confirm to accept the change.
Note
According to the response message from the server, the IP phone will automatically
configure the BLF List keys beginning from the first unused DSS key (The default order of
BLF list keys assigned automatically is Line Key->Memory Key->Ext Key). Once any DSS
key is seized, the IP phone will skip to configure the next DSS key.
You can receive a visual or/and an audio alert (if enabled) on your phone when the
For more information on BLF List URI/BLF List Code/BLF List Barge In Code/BLF List Retrieve
Call Parked Code, contact your system administrator.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
