Customizing Your Phone
35
3. Press the Option soft key, and then select Add to Contacts from the prompt list.
4. Enter the contact name.
5. Press the Save soft key to accept the change.
The entry is successfully saved to the local directory.
Adding Contacts from a Remote Phone Book
To add a contact to the local directory from a remote phone book:
1. Press Dir->Remote Phone Book.
If remote phone book is removed from the directory, press Menu->Dir->Remote
Phone Book to enter the remote phone book.
2. Press or to select the desired contact.
3. Press the Option soft key, and then select Add to Contacts from the prompt list.
4. Press the Save soft key to save the contact in the local directory.
If the contact already exists in the local directory, the LCD screen will prompt
“Overwrite the original contact?”. Press the OK soft key to overwrite the original
contact in the local directory or the Cancel soft key to cancel.
For more information on remote phone book operating, refer to Remote Phone Book on
page 42.
To edit a contact in the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directory
to enter the local directory.