Yealink SIP-T26P User Manual

User Guide for the SIP-T26P IP Phone
110
To use hot desking:
1. Press the hot desking key when the phone is idle.
The LCD screen prompts “Clear all account config?”.
2. Press the OK soft key, registration configurations of all accounts will be cleared
immediately.
The login wizard will be displayed as below:
3. Enter the desired values in the User Name and Password fields respectively.
Contact your system administrator for more information.
4. Press the Save soft key to login or Cancel soft key to cancel.
Intercom is a useful feature in an office environment to quickly connect with the operator
or the secretary. You can press the intercom key to automatically connect with a remote
extension for outgoing intercom calls, and the remote extension will automatically
answer incoming intercom calls.
Note
To configure an intercom key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
Intercom is not available on all servers. Contact your system administrator for more
information.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g