Yealink SIP-T26P User Manual

User Guide for the SIP-T26P IP Phone
32
4. Press or to select the desired group ring tone from the Ring field.
If Auto is selected, this group will use the ring tone specified for the contact. If no
ring tone is specified for the contact, it will then play the ring tone specified for the
account. For more information on ring tone for the account, refer to Ring Tones on
page 28.
5. Press the Add soft key to accept the change or the Back soft key to cancel.
To edit a group in the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directory
to enter the local directory.
2. Select the desired group (e.g., Test).
3. Press the Option soft key, and then select Detail from the prompt list.
4. Press or to select the group information and then edit.
5. Press the Save soft key to accept change or the Back soft key to cancel.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g