Yealink SIP-T26P User Manual

User Guide for the SIP-T26P IP Phone
136
2. Click Browse to locate the required firmware from your local system.
3. Click Upgrade to upgrade the firmware.
The web user interface prompts “Firmware of the SIP Phone will be updated. It will
take 5 minutes to complete. Please don't power off!”.
4. Click OK to confirm upgrading.
How to reset the phone?
Reset the phone to factory configurations after you have tried all troubleshooting
suggestions but do not solve the problem. You need to note that all custom settings will
be overwritten after resetting. We recommend asking your system administrator for
advice before resetting the phone.
To reset the phone via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin).
2. Press or to scroll to Reset to Factory, and then press the Enter soft key.
The LCD screen prompts “Reset to factory settings?”.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g