Overview
5
Line key LED (configured as a BLF key or BLF List key)
The monitored user is idle.
Fast flashing green (200ms)
The monitored user receives an incoming call.
Slow flashing green (500ms)
The monitored user is dialing.
The monitored user is talking.
The monitored user’s conversation is placed on
hold (This status requires server support).
The call is parked against the monitored user’s
phone number.
The monitored user does not exist.
Memory key LED (configured as a BLF key or BLF List key)
The monitored user is idle.
Fast flashing red (200ms)
The monitored user receives an incoming call.
The monitored user is dialing.
The monitored user is talking.
The call is parked against the monitored user’s
phone number.
The monitored user’s conversation is placed on
hold (This status requires server support).
The monitored user does not exist.
Note
Two ways to customize configurations of your SIP-T26P IP phone:
The user interface on the IP phone.
The user interface in a web browser on your PC.
The hardware components keypad and LCD screen constitute the phone user interface,
which allows the user to execute all call operation tasks and basic configuration
changes directly on the phone. In addition, you can use the web user interface to
access all configuration settings. In many cases, either the phone user interface and/or
the web user interface interchangeably. However, in some cases, it is only possible to
use one or the other interface to operate the phone and change settings.
The above introduces the default LED status. The statuses of the power indicator LED and
BLF key are configurable via web user interface. For more information, refer to
Yealink_SIP-T2xP_IP_Phones_Administrator_Guide.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
