Yealink SIP-T26P User Manual

User Guide for the SIP-T26P IP Phone
74
To enable recent call in dialing via web user interface:
1. Click on Directory->Setting.
2. Select Enabled from the pull-down list of Recent Call In Dialing.
3. Click Confirm to accept the change.
Note
To view placed calls list when the phone is in the pre-dialing screen:
1. Pick up the handset, press the speakerphone or press the line key.
The LCD screen displays the placed calls list.
You can use auto answer to automatically answer an incoming call on a line. Auto
answer is configurable on a per-line basis.
To configure auto answer via phone user interface:
Recent call in dialing is configurable via web user interface only.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g