EasyManuals Logo
Home>Yealink>IP Phone>SIP-T26P

Yealink SIP-T26P User Manual

Yealink SIP-T26P
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Getting Started
13
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen
displays “Initializing, Please wait…” during this process.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid network
settings (e.g., IP address, subnet mask, default gateway address and DNS address) by
default.
Note
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
Network status (e.g., IPv4 status, IP mode, and MAC address).
Phone status (e.g., product name, hardware version, firmware version, product ID,
MAC address and device certificate status).
Account status (e.g., the register status of SIP accounts).
Note
To view the phone status via phone user interface:
1. Press , or press Menu->Status.
2. Press or to scroll through the list and view the specific information.
To view the phone status via web user interface:
1. Open a web browser on your computer.
2. Enter the IP address in the browser’s address bar, and then press Enter.
If your network does not use DHCP, proceed to Basic Network Settings on page 14.
You can view device certificate status via phone user interface only.

Table of Contents

Other manuals for Yealink SIP-T26P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T26P and is the answer not in the manual?

Yealink SIP-T26P Specifications

General IconGeneral
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Keypad number of keys45
Number of handles included1 pc(s)
Touchscreen-
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity- entries
Number of VoIP accounts3
Voice codecsG.711, G.722, G.723.1, G.726
BluetoothNo
Security algorithmsHTTPS, SSL/TLS
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)2.6 W
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Compliance industry standardsIEEE 802.3af
Weight and Dimensions IconWeight and Dimensions
Depth204 mm
Width273 mm
Height42 mm
Weight1050 g

Related product manuals