Yealink SIP-T26P User Manual

Customizing Your Phone
29
A ring tone for the account is configurable via web user interface at the path
Account->Basic->Ring Type.
Note
To upload a custom ring tone for your phone via web user interface:
1. Click on Settings->Preference.
2. Click Browse to locate a ring tone file (the file format must be *.wav) from your local
system.
3. Click Upload to upload the file.
Note
This section provides the operating instructions for managing contacts. Topics include:
 Directory
 Local Directory
 Blacklist
 Remote Phone Book
All custom ring tone files must be no greater than 100KB.
Custom ring tones for your phone can be uploaded via web user interface only.
The ring tone for an incoming call on the phone may be different. For example, when the
phone receives an incoming call from a contact stored in the local directory, it will play
the ring tone assigned to the contact in the contact directory (refer to Adding Contacts).
If no ring tone is assigned to the contact, the phone will play the ring tone assigned to the
associated group (refer to Adding Groups). Otherwise, the phone will play the ring tone
assigned to the account. If no ring tone is assigned to the contact, the associated group
or account, the phone will play the ring tone assigned to the phone.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g