Yealink SIP-T26P User Manual

User Guide for the SIP-T26P IP Phone
26
To change the phone unlock PIN via phone user interface:
1. Press Menu->Settings->Basic Settings->Change PIN.
2. Enter the old PIN in the Current PIN field.
3. Enter the new PIN in the New PIN field.
4. Re-enter the new password in the Confirm PIN field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To unlock the phone via phone user interface:
1. Press any locked key, the LCD screen prompts “Please Enter PIN”.
2. Enter the PIN in the Phone Unlock PIN field.
3. Press the OK soft key to unlock the phone.
The icon disappears from the LCD screen.
You can long press or wait for a period of time (if configured) to lock the
phone again.
Note
To deactivate the phone lock via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Phone
Lock.
You can also unlock thephone by administrator password. When you enter the
administrator password to unlock the phone, the phone will turn to the Reset Phone PIN
screen.
The unlock PIN length must be within 15 digits.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g