Yealink SIP-T26P User Manual

Customizing Your Phone
51
 XML Group
 XML Brower
 LDAP
 Conference
 Forward
 Transfer
 Hold
 DND
 SMS
 Group Listening
 Zero Touch
 URL
 Phone Lock
 Directory
For the features not listed above, refer to Basic Call Features on page 69 and Advanced
Phone Features on page 103. For more information, contact your system administrator.
Line
You can use this key feature to accept incoming calls, place active calls on hold or
resume a held call. It performs in the same way as a hard line key.
Dependencies: Type (Line)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Usage: When receiving an incoming call, the DSS key LED flashes green:
1. Press the DSS key to accept the incoming call.
2. Press the DSS key to place a new call and the active call is placed on hold.
3. Press the DSS key again to resume the held call.
Speed Dial
You can use this key feature to speed up dialing numbers frequently used or hard to
remember.
Dependencies: Type (Speed Dial)
Account ID (the account this feature will be applied to)
Value (the number you want to dial out)
Usage: Press the DSS key to dial out the number specified in the Value field, using the
account selected from the Account ID field.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g