User Guide for T4 Series IP Phones
122
A message is displayed on the LCD screen:
2. Wait for the designated period of time or press OK to redial the phone number.
The phone will retry as many times as configured until the called party answers the call.
Call Completion
You can enable call completion to notify the caller who failed to reach a desired party when the
desired party becomes available to receive a call.
Enabling Call Completion
Procedure:
1. Navigate to Menu->Features->Others->Call Completion.
For the SIP-T48S/T48G/T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to
Menu->Features->Call Completion.
2. Select Enabled from the Call Completion field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the Call Completion field.
3. Press Save.
Call completion is configurable via web user interface at the path Features->General
Information.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
