User Guide for T4 Series IP Phones
42
The maximum registered accounts vary from different phone models:
Note
Registering an Account
Procedure:
1. Navigate to Menu->Advanced (default password: admin) ->Accounts.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to
Menu->Settings->Advanced Settings (default password: admin) -> Accounts.
2. Select a desired account.
3. Select Enabled from the Activation field.
4. Enter the desired value in the Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively.
5. If you use the outbound proxy servers, do the following:
1) Select Enabled from the Outbound Status field.
2) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval field
respectively.
6. Press Save.
You can repeat steps 2 to 6 to register more accounts.
Account registration is configurable via web user interface at the path Account->Register.
The following figures demonstrate single or multiple accounts registered on the phone:
Single account:
Contact your system administrator for the account information.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
