Yealink SIP-T4 S Series User Manual

Advanced Phone Features
157
Advanced Phone Features
This chapter explains how to use the advanced features on the IP phone. Topics include:
 Busy Lamp Field (BLF)
 BLF List
 Call Recording
 Hot Desking
 Intercom
 Multicast Paging
 Automatic Call Distribution (ACD)
 Shared Call Appearance (SCA)
 Bridged Line Appearance (BLA)
 Messages
If you require additional information or assistance with your new phone, contact your system
administrator.
Busy Lamp Field (BLF)
You can use BLF to monitor a specific line for status changes on the phone. For example, you
can configure a BLF key on the phone to monitor the status of a friend’s line (busy or idle). The
BLF key LED glows red when the friend’s line is in use.
You can also enable visual and audio alert features for BLF pickup on the phone.
You can use the BLF key to do the following:
 Placing a call to the monitored user
 Transferring a call to the monitored user
 Pick up an incoming call of the monitored user
 Parking a call to/retrieving a parked call from the monitored user
Configuring a BLF Key
You can configure a BLF key to monitor a specific line for status changes on the phone. You can
also initiate an outgoing intercom call to the monitored user, or assign a pick up code for BLF
key first to pick up an incoming call of the monitored user. Check with your system
administrator to find out if these features are available on your phone.
Downloaded from ManualsNet.com search engine

Yealink SIP-T4 S Series Specifications

General

Brand	Yealink
Model	SIP-T4 S Series
Category	IP Phone
Language	English