User Guide for T4 Series IP Phones
140
Conference
The IP phones support 3-way local conference and multi-way network conference.
Note
Local Conference
The IP phones support three-way (including yourself) conference call, which is the default
conference type called Local Conference. You can set up a conference between an active call
and a hold call at any time by pressing the Conference (Conf) soft key.
Note
Setting Up a Local Conference Call
Procedure:
1. Place a call to the first party.
2. When the first party answers the call, press Conference (Conf) to place a new call.
3. Enter the number of the second party to dial out.
You can also select a desired contact from the search list, or select a contact from the
placed call list or Directory before you enter the number. On the SIP-T48S/T48G IP phone,
you can select a desired contact from the left sidebar, or select a contact from the Directory
or History.
The active call is placed on hold.
4. When the second party answers the call, press Conference (Conf) again to join all parties in
the conference.
Network conference is not available on all servers. For more information, contact your system
administrator.
To set up a local conference call, make sure local conference feature is enabled. For more
information, contact your system administrator.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
