Customizing Your Phone
63
3. Press Save.
Administrator password is configurable via web user interface at the path Security->Password.
Configuring Key As Send
You can set the “#” key or “*” key to perform as a send key while dialing.
Procedure:
1. Navigate to Menu->Features->Others->General.
For the SIP-T48S/T48G IP phones, navigate to Menu->Features->General.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to
Menu->Features->Key As Send.
2. Select # or * from the Key As Send field, or select Disabled to disable this feature.
3. Press Save.
Key as send is configurable via web user interface at the path Features->General Information.
Phone Lock
You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
For the SIP-T46S/T46G/T42S/T42G/T41S/T41P/T40G/T40P IP phone, the phone lock consists of
the following:
Menu Key: The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
Function Keys: The function keys are locked. You cannot use the MESSAGE, REDIAL,
HOLD, MUTE, TRANSFER, OK, Cancel, navigation keys and soft keys
until unlocked.
All Keys: All keys are locked except the Volume key, digit keys, # key, * key,
HEADSET key and Speakerphone key. You are only allowed to dial
emergency numbers, reject incoming calls by pressing the Cancel key
or the Reject soft key, answer incoming calls by lifting the handset,
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
