User Guide for T4 Series IP Phones
40
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to IPv4->DHCP IPv4
Client.
4. Press Save.
If you want to configure DHCP for IPv6, select IPv6 or IPv4 & IPv6 from the IP Mode in the step
2.
DHCP is configurable via web user interface at the path Network->Basic.
Configuring the Static IPv4 Address
Procedure:
1. Navigate to Menu->Advanced (default password: admin) ->Network->WAN Port.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port.
2. Select IPv4 or IPv4 & IPv6 from the IP Mode field.
3. Enter IPv4, and then select Static IP from the Type field.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to IPv4->Static IPv4
Client.
4. Enter the desired value in the IP Address, Subnet Mask, Default Gateway, Pri.DNS and
Sec.DNS field respectively.
5. Press Save.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
