Yealink SIP-T4 S Series User Manual

User Guide for T4 Series IP Phones
204
The phone dials the entered number.
- Press the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the dialpad, and then press the OK key, # key or Send.
The phone dials the entered number.
Placing Multiple Calls on the Bridged Line
Procedure:
You can have more than one call on the bridged line. To place a new call when there is an active
call on phone A, do one of the following on the phone A:
- Press the HOLD key or Hold. The original call is placed on hold.
Press New Call (NewCall) to enter the dialing screen.
Enter the desired number using the dialpad.
Press the OK key, # key, or Send.
Phone A dials the entered number.
- Press the line key. The original call is placed on hold.
Enter the desired number using the dialpad.
Press the OK key, # key, or Send.
Phone A dials the entered number.
Answering Calls
When the phone C dials the BLA number “14084588327”, an incoming call will arrive on the
bridged line. The phone A and phone B ring simultaneously. You can answer the incoming call
on either phone A or phone B but not both.
Downloaded from ManualsNet.com search engine

Yealink SIP-T4 S Series Specifications

General

Brand	Yealink
Model	SIP-T4 S Series
Category	IP Phone
Language	English