Customizing Your Phone
73
to edit, delete, search or simply dial a contact from the local directory.
Note
Adding Groups
Procedure:
1. Press Directory (Dir) or navigate to Menu->Directory->Local Directory to enter the local
directory.
On the SIP-T48S/T48G IP phone, tap Directory or navigate to Menu->Directory.
2. Press AddGroup (AddGr).
On the SIP-T48S/T48G IP phone, tap Setting->New Group.
3. Enter the desired group name in the Name field.
On the SIP-T48S/T48G IP phone, enter the desired group name, and then tap to
accept the change.
4. Select the desired group ring tone from the Ring field.
On the SIP-T48S/T48G IP phone, tap to specify a ring tone for the group.
If Auto is selected, this group will use the ring tone according to the priority: Contact ring
tone (refer to Adding Contacts) >Account ring tone (refer to Ring Tones) >Phone ring tone
(refer to Ring Tones). If a specific ring tone is selected, this group will use the ring tone
according to the priority: Contact ring tone (refer to Adding Contacts) >Group ring tone.
5. Press Save.
On the SIP-T48S/T48G IP phone, tap OK.
On the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, press Add.
Adding groups is configurable via web user interface at the path Directory->Local Directory.
You can back up the local directory to the provisioning server. For more information, contact your
system administrator.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
