Yealink SIP-T54S User Manual

Customizing Your Phone
91
The Bluetooth headset is disconnected. To connect it to your IP phone again, press the
Connect soft key.
Deleting the Paired Bluetooth Headset
You can delete your Bluetooth headset from your phone. When you delete the Bluetooth
headset, it disappears from the Paired Bluetooth Device list. To connect it to your IP phone
again, you need to scan and connect it again.
To delete your Bluetooth headset from your phone:
1. Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
2. Select the Bluetooth headset you want to delete.
3. Press the Option soft key, and then select Delete from the prompt list.
The LCD screen prompts the following warning “Delete selected item?”.
4. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
Note
You can also delete all headsets by pressing the Option soft key and then select Delete All. For
more information, refer to the above steps.
If you cannot connect a Bluetooth headset to the phone successfully, we recommend that you
delete the Bluetooth headset from the Paired Bluetooth Device list (if it exists) before pairing it.

Yealink SIP-T54S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	-
Bluetooth version	2.1+EDR
Ethernet LAN interface type	Gigabit Ethernet
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
AC adapter input voltage	100 - 240 V
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.722, G.723, G.723.1, G.726, G.729B, OPUS, iLBC
Front camera	No
Volume control	Digital
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Operating system installed	Linux

Weight and Dimensions

Depth	218.8 mm
Width	233 mm
Height	172.6 mm