Yealink SIP-T54S - Connecting to the Wireless Network

Getting Started
29
Connecting to the Wireless Network
Three ways to connect SIP-T54S media IP phone to the wireless network:
 Manually connect to an available wireless network
 Wi-Fi Protected Setup (WPS)
 Manually add a wireless network
Manually Connect to an Available Wireless Network
To manually connect to a wireless network via phone user interface:
1. Press Menu->Basic->Wi-Fi.
2. Press or to highlight X Available Network(s) (X represents the number of
available networks), and then press the Enter soft key.
If there is no available wireless network, press the Scan soft key to search for the wireless
network again.
3. Press or to select the desired wireless network.
4. Press the Connect soft key.
5. If the network is secure, enter its password in the PIN Password field.
6. Press the OK soft key.