Yealink SIP-T54S - FAC Mode

User Guide for the SIP-T54S Media IP Phone
152
4. Press or , or the Switch soft key to select the desired line from the Account ID
field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. (Optional.) Enter the park retrieve code in the Value field.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
If the park retrieve code is already configured for the Retrieve soft key, you don’t need to
configure it when configuring a retrieve park key.
Call park key and retrieve park key are configurable via web user interface at the path
Dsskey->Line Key.
Note
FAC Mode
To configure call park feature in FAC mode via web user interface:
1. Click on Features->Call Pickup.
2. Select FAC from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and the
Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call park key.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
It is configured for the Retrieve soft key. This park retrieve code will also apply to the
retrieve park key.
The call park code and park retrieve code are predefined on the system server. Contact your
system administrator for more information.