Basic Call Features
121
- Press to access the new call.
Press or the Answer soft key.
The incoming call is answered and the original call is placed on hold.
Auto Answer
You can use auto answer feature to automatically answer an incoming call using the
speakerphone. Auto answer is configurable on a per-line basis.
You can choose to mute the local microphone when an incoming call is answered automatically.
To configure auto answer via phone user interface:
1. Press Menu->Features->Auto Answer.
2. Select the desired line and then press the Enter soft key.
3. Press or , or the Switch soft key to select Enabled from the Auto Answer field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen only when the auto answer feature is enabled for
the default account.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer only takes effect when there is no other call in progress on the phone. If there is a
call in progress, the second incoming call cannot be automatically answered after ending the
current call by default. If you want to make the phone automatically answer the incoming call
after ending all calls, contact your system administrator for more information.
To Next Page
Loading...
