Yealink SIP-T54S User Manual

User Guide for the SIP-T54S Media IP Phone
158
press the More soft key to see the DPickup soft key).
The DPickup soft key appears on the LCD screen.
2. Press the DPickup soft key on your phone when the target phone receives an incoming
call.
3. Enter the phone number which is receiving an incoming call.
4. Press the DPickup soft key again.
The call is answered on your phone.
You can also configure a DSS key as a direct pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by pressing the direct pickup key directly. For
more information, refer to DSS Keys on page 92.
Group Call Pickup
To enable group call pickup and configure the group call pickup code on a global basis via
web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Group Call Pickup.
3. Enter the group call pickup code in the Group Call Pickup Code field.

Yealink SIP-T54S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	-
Bluetooth version	2.1+EDR
Ethernet LAN interface type	Gigabit Ethernet
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
AC adapter input voltage	100 - 240 V
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.722, G.723, G.723.1, G.726, G.729B, OPUS, iLBC
Front camera	No
Volume control	Digital
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Operating system installed	Linux

Weight and Dimensions

Depth	218.8 mm
Width	233 mm
Height	172.6 mm